 |
首頁 > 英聯(lián)產(chǎn)品 > 接口 > RS485接口 |
|
Key Specifications
Product Description
The UM3486E are 3V to 5.5V-powered, ±15kV ESD-protected, slew-rate-limited differential transceivers which provide full RS485 compatibility. Each part contains one driver and one receiver, which is designed for data transmission with extended common mode range (-7V to 12V). The partially slew-rate-limited UM3486E transmits at data rates up to 2.5Mbps.
The UM3486E also feature enhanced electrostatic discharge (ESD) protection. All of the transmitter outputs and receiver inputs are protected to ±15kV using IEC61000-4-2 Air-Gap Discharge, ±8kV using IEC61000-4-2 Contact Discharge and ±8kV using the Human Body Model.
Drivers are short-circuit current limited. When the driver outputs are placed into a high-impedance state by thermal shutdown circuitry, drivers are protected against excessive power dissipation. And the fail-safe feature of the receiver input guarantees a logic-high output if both inputs are open, shorted or idle.
The UM3486E have power up/down mode, the glitch-free driver outputs permit live insertion or removal of the transceiver into/from the data bus. The CMOS design offers significant power savings without sacrificing ruggedness against overload or ESD damage. The typical quiescent current is only 300μA during operation and 1μA in shutdown mode.
The UM3486E are intended for half-duplex communication and are available in SOP8 and DIP8 packages.
Features
- ESD Protection for RS-485 I/O Pins
±8kV—Human Body Model
±15kV—IEC61000-4-2, Air-Gap Discharge
±8kV—IEC61000-4-2, Contact Discharge
- 3V to 5.5V Supply Voltage Range
- Enhanced Slew-Rate Limiting Facilitates Error-Free Data Transmission
- 1μA Low-Current Shutdown Mode
- -7V to +12V Common-Mode Input Voltage Range
- Allows up to 256 Transceivers on the Bus
- Thermal Shutdown
- Current-Limiting for Driver Overload Protection
Typical Operating Circuits
 Applications
- Telecommunications
- Low-Power RS-485 Transceivers
- Integrated Services Digital Networks
- Industrial-Control Local Area Networks
- Transceivers for EMI-Sensitive Applications
- Packet Switching
- Level Translators
Pin Configurations
 Communication Function Table
Table1. Transmitting
X=Don’t care; High-Z=High impedance
Table2. Receiving
X=Don’t care; High-Z=High impedance
Ordering Information
|
Application Notes
Product Selection Guide
Product Search
Product You Recently Viewed
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
